Pinboard

For every location

Beginner

15min

Required tools

Board (thickness and dimensions as required)

Straight batten (spirit level)

Glass cleaner

605mm drill bit

Drilling machine

Step by step manual

Step 1

Board with diamonds of any size, with a removable pin

Use a spirit level for straight lines, for example

Step 2

Draw a mark for drilling on the adjacent diamonds on each line at a distance of approx. 1-2 cm from each other

Step 3

Drill holes on the marking

Step 4

Remove all marks with glass cleaner

Step 5

Pull the rubber cord through the drilled holes and hang in any desired location

The diamonds should now be recognisable on the front again